1987―1991日本广岛大学移动现象工学专业博士
1985―1987日本广岛大学移动现象工学专业硕士
1979―1983我校船舶动力机械工程专业学士

1991―1992 美国卡内基梅隆大学 　 博士后
1992―1995 美国卡内基梅隆大学 　 研究员
1995―1998 美国通用汽车德尔福分部 　 资深项目工程师
1998―2000 福特汽车公司伟世通分部 　 技术专家
2000―2003 美国伟世通公司研发中心 　 高级技术专家
2003―2006 安徽奇瑞汽车有限公司 　 副总经理兼研究院院长
2006―至今 我校 　 汽车工程研究院院长

喷雾与燃烧研究
内燃机燃烧系统
发动机节能环保技术
车用发动机设计与开发
混合动力汽车发动机技术
电驱动系统和电动车集成技术

2002―2006 国家973项目子课题“均质压燃原型车的开发和关键技术攻关”，负责人
2003―2005 国家863项目“QR混合动力轿车整车开发”，技术负责人
2004―2006 国家863项目“BSG混合动力轿车关键技术与核心零部件研发”，技术负责人
2007―2008 上汽通用五菱项目“1.2L发动机低端扭矩提升研究”，负责人
2007―2008 安凯客车项目“大型客车燃油经济性优化研究”，负责人
2007―2009 上海市科委项目“Atkinson循环发动机关键技术研究”，负责人
2007―2009 伊顿美国项目“增压发动机的开发”，负责人
2008―2009 香港APAS项目“发动机防盗器的开发”，负责人
2008―2010 江淮汽车项目“2.0L发动机NVH性能提升研究”，负责人
2008―2010 国家863项目“乘用车柴油发动机的开发”，子项目负责人
2008―2010 上海市科委项目“水平对置式两缸模块化发动机样机研制”，负责人
2008―2010 通用美国项目“汽车代用燃料的喷雾特性研究”，负责人
2009―2010 通用美国项目“涡轮增压直喷发动机喷雾与燃烧研究”，负责人
2009―2010 通用美国项目“匹配VVT的涡轮增压直喷发动机的燃烧研究”，负责人
2010―2010 伊顿美国项目“TVS增压器与上汽1.5L发动机的匹配”，负责人
2010―2011 通用美国项目“直喷发动机代用燃料的喷雾燃烧特性后续研究1”，负责人
2010―2012 通用汽车中国项目“低成本电动车技术方案调查和研究”，负责人
2010―2011 MOH项目“与MOH联合研究项目”，负责人
2010―2011 清华大学项目“面向中美清洁能源合作的电动汽车前研究”，负责人
2011―2013 自然科学基金“基于乙醇燃料解明液体射流破碎机理的研究”，负责人
2011―2013 密西根专项基金项目“代用燃料喷雾温度场测量”，负责人
2011―2012 NTN株式会社项目”交大与NTN共同实施装载的电动汽车的车身设计、试制、评估”，负责人
2011―2012 福特汽车美国项目” 对DISI发动机过热喷雾中闪沸过程的机理分析”，负责人
2011―2012 通用汽车美国项目” 直喷发动机单孔和多孔喷嘴的喷雾与燃烧特性2”，负责人
2011―2012 通用汽车美国项目” VVT技术对高压缩比小型化直喷汽油机性能的影响”，负责人
2011―2011 上海汽车项目” 直喷发动机喷油器喷雾测试及CFD模拟计算”，负责人
2011―2012 上汽通用五菱汽车项目” 发动机压缩比与性能关系研究试验项目（2微米）”，负责人
2011―2014 中石油润滑油公司项目“ 新型汽车发动机润滑油研究”，负责人
2011―2014 通用汽车项目“火花点火式缸内直喷发动机的燃油喷雾特性”，负责人
2011―2014 博世（中国）项目”高性价比电动汽车”，负责人
2012―2013 日本富士电机项目” 模块化电动车”，负责人
2012―2013 合肥常青机械股份有限公司项目“上海交大-长青机械联合产业化基地”，负责人
2012―2015 航天新长征电动汽车项目“混合动力城市公交动力总成性能优化与控制策略设计开发”，负责人
2012―2015 仪征市人民政府项目“上海交大-仪征汽车工业园联合产业化基地”，负责人
2012―2013 通用汽车美国项目“针对高压缩比增压发动机预点火、爆震和碳烟排放特性的研究”，负责人
2012―2014 日产汽车日本项目“减少汽车直喷发动机冷启动阶段的碳氢化合物的喷雾与燃烧研究”，负责人
2013―2014 通用汽车美国项目“直喷汽油机单孔和多孔喷喷油器的喷雾和燃烧特性3”，负责人
2013―2014 EATON美国项目“ NSE1.5L机械增压发动机技术研究合作”,负责人
2013―2014 “一汽-大众奥迪绿色创意大赛”活动合作协议，负责人
2013―2014 泛亚技术中心“混合动力系统测试研究”,负责人
2013―2014 中石油润滑油公司项目“新型汽车发动机润滑油研究（补充合同）”负责人
2013―2015 福特汽车美国项目“缸内直喷发动机在过热喷雾条件下闪沸过程的机理研究”，负责人
2014―2017 国家自然科学基金项目"喷孔内过热流体的气泡生成及微爆雾化机理研究",负责人
2015―2017 重庆力帆乘用车有限公司“力帆乘用车-上海交大汽车技术联合研究中心”,负责人
2015―2017 新乡航空工业（集团）有限公司“新航集团上海研发中心发展规划咨询”,负责人
2015―2017 合肥常青机械股份有限公司项目“上海交大-长青机械联合产业化基地”,负责人
2015―2017 仪征市人民政府项目“上海交大-仪征汽车工业园联合产业化基地”,负责人
2015―2020 湘潭九华经济开发区项目“湘潭经济技术开发区——我校共建汽车工程联合研发中心项目战略合作协议”负责人
2016―2018 安徽江淮汽车集团股份有限公司“江淮汽车-上海交大关于共建“江淮汽车-上海交大汽车技术联合研究中心””,负责人
2016―2017 通用汽车美国项目“德尔福直喷汽油发动机喷油器的喷雾碰壁特性”,负责人
2016―2018 埃克森美孚（中国）投资有限公司“润滑油对直喷汽油机早燃影响试验研究”,负责人
2016―2018 上海豪骋机电科技有限公司“上海交大-上海豪骋科技新能源技术联合研发中心”,负责人
2017―2019 法雷奥企业管理（上海）有限公司“法雷奥-我校汽车技术联合研发中心框架协议”,负责人
2018―2019 联合汽车电子“闪沸对喷雾特性影响的实验研究”,负责人
2018―2020 自然基金面上项目“高速细微喷雾碰壁后油膜流动与破碎的动态机理研究”,负责人,
2018―2021 大乘汽车有限公司“大乘汽车-上海交大汽车技术联合研发中心”,负责人

期刊论文:
1. Shangze Yang, Zhen Ma, David LS Hung, Xuesong Li*, Min Xu, A review on the experimental non-intrusive investigation of fuel injector phase changing flow. Fuel, 2019, 259: C116188
2. Xue Dong, Jie Yang, David LS Hung, Xuesong Li, Min Xu*,Effects of flash boiling injection on in-cylinder spray, mixing and combustion of a spark-ignition direct-injection engine. Proceedings of the Combustion Institute , 2019, 37: 4921-4928
3. Jingjing Cao, Zhen Ma, Xuesong Li, Min Xu*, Three-dimensional proper orthogonal decomposition analysis of engine in-cylinder velocity fields. Measurement Science and Technology, 2019, 30: 085304
4. Di Xiao, Ichikawa Yukihiko, Xuesong Li, David Hung, Keiya Nishida, Min Xu*, Film breakup of tilted impinging spray under various pressure conditions. International Journal of Engine Research, 2019
5. Xuesong Li, Di Xiao, Scott E. Parrish, Ronald O Grover, Jr, David LS Hung, Min Xu*, Dynamics of spray impingement wall film under cold start conditions. International Journal of Engine Research, 2019
6. Xuesong Li, Tianyun Li, Min Xu*, Effect of ambient temperature on flash-boiling spray characteristics for a multi-hole gasoline injector. Experiments in Fluids, 2019, 60(7): 109
7. Fengnian Zhao, Mengqi Liu, Penghui Ge, David LS Hung*, Xuesong Li, Min Xu, Xiaofeng Yang, Cherian Idicheria, Multi-plane time-resolved Particle Image Velocimetry (PIV) flow field measurements in an optical Spark-Ignition Direct-Injection (SIDI) engine for Large-Eddy Simulation (LES) model validations. Oil & Gas Science and Technology–Revue d’IFP Energies nouvelles, 2019, 74: 52
8. Yi Gao, Shengqi Wu, Xue Dong, Xuesong Li, Min Xu*, Evaporation and atomization characteristics of dual-fuel system under flash boiling conditions. Applied Thermal Engineering, 2019, 161:114161
9. Shangze Yang, Zhen Ma, Shengqi Wu, Xuesong Li*, Min Xu, Dynamic characteristics of in-nozzle flash boiling bubbles and corresponding temporal responses of external spray. Experiments in Fluids, 2019, 60: 158
10. Hujie Pan, Di Xiao, David Hung, Min Xu, Xuesong Li*, Experimental investigations of wall jet droplet impact on spray impingement fuel film formation. Fuel, 2019, 241: 33-41
11. Qinglin Xu, Hujie Pan, Yi Gao, Xuesong Li*, Min Xu, Investigation of two-hole flash-boiling plume-to-plume interaction and its impact on spray collapse. International Journal of Heat and Mass Transfer, 2019, 138: 608-619
12. Shangze Yang, Xuesong Li, David L.S. Hung, Masataka Arai, Min Xu*, In-nozzle flash boiling flow of multi-component fuel and its effect on near-nozzle spray. Fuel, 2019, 252: 52-67
13. Xuesong Li, Shangze Yang, Tianyun Li, David Hung, Min Xu*, Investigations on near-field atomization of flash boiling sprays for gasoline direct injection related applications. Fuel, 2019, 257: 116080
14. Xuesong Li, Hujie Pan, Xue Dong, David LS Hung, Min Xu*, Spray Impingement Wall Film Breakup by Wave Entrainment. Proceedings of the Combustion Institute, 2019, 37: 3287-3294
15. Zhao, Fengnian, Liu, Mengqi, Ge, Penghui, Hung, David LS Hung*, Li, Xuesong, Xu, Min, Yang, Xiaofeng, Idicheria, Cherian, Multi-plane time-resolved Particle Image Velocimetry (PIV) flow field measurements in an optical Spark-Ignition Direct-Injection (SIDI) engine for Large-Eddy Simulation (LES) model validations. Oil & Gas Science and Technology-Revue de l Institut Francais du Petrole, 2019, 74: 52.
16. Shengqi Wu, Shangze Yang, Margaret Wooldridge, Min Xu*, Experimental study of the spray collapse process of multi-hole gasoline fuel injection at flash boiling conditions. Fuel, 2019, 242: 109-123.
17. Jie Yang, Xue Dong*, Qiang Wu, Min Xu, Effects of enhanced tumble ratios on the in-cylinder performance of a gasoline direct injection optical engine. Applied Energy, 2019, 236: 137-146.
18. 吴天宝, 范亚东, 李雪松, 许敏*, 机油元素组分对低速早燃与超级爆震的影响.车用发动机, 2019 , (02): 22-27,.
19. 章鸣铭, 吴晓东, 许敏*, 基于齿条力估计的线控转向系统主动跟踪器研究.机电工程, 2019, (03): 229-235.
20. Tianyun Li, Xue Dong, David LS Hung, Xuesong Li, Min Xu*, Analysis of Evaporation Characteristics and Heat Transfer for Flash-boiling Sprays. International Journal of Heat and Mass Transfer, 2018, 127: 244-254
21. Shangze Yang, Xuesong Li, David LS Hung, Min Xu*, Characteristics and Correlation of Nozzle Internal Flow and Jet Breakup under Flash Boiling Conditions. International Journal of Heat and Mass Transfer, 2018, 127: 959-969
22. Jie Yang, Xue Dong, Qiang Wu, Min Xu*, Influence of flash boiling spray on the combustion characteristics of a spark-ignition direct-injection optical engine under cold start. Combustion and Flame, 2018, 188: 66-76.
23. 华寅, 许敏*, 基于双非线性预测滤波法的锂离子电池SOH估计.电源技术, 2018, (09): 1321-1324.
24. 吴东远, 李雪松, 董雪, 许敏*, 快速压缩(膨胀)机的湍流问题和光学诊断优化方法.车用发动机, 2017, (01): 1-7,.
25. 程似骐,许敏*, 高弈, 吴胜奇, 董雪, 双组分燃油蒸馏及喷雾闪沸特性研究.车用发动机, 2017, (02): 1-6.
26. 秦征骁, 许敏*, 尹鹏, 不同喷射工况下的GDI喷雾模拟标定研究.车用发动机, 2017, (02): 19-26.
27. Shengqi Wu, Min Xu*, David LS Hung, Hujie Pan, Effects of nozzle configuration on internal flow and primary jet breakup of flash boiling fuel sprays. International Journal of Heat and Mass Transfer, 2017, 110: 730-738.
28. Shengqi Wu, Min Xu*, David LS Hung, Hujie Pan, In-nozzle flow investigation of flash boiling fuel sprays. Applied Thermal Engineering, 2017, 117: 644-651.
29. Jie Yang, Min Xu*, David LS Hung, Qiang Wu, Xue Dong, Influence of swirl ratio on fuel distribution and cyclic variation under flash boiling conditions in a spark ignition direct injection gasoline engine. Energy Conversion and Management, 2017, 138: 565-576.
30. Shengqi, Wu, Min Xu David LS Hung*, Tianyun Li, Hujie Pan, Near-nozzle spray and spray collapse characteristics of spark-ignition direct-injection fuel injectors under sub-cooled and superheated conditions. Fuel, 2016, 183: 322-334
31. Ziqiang Chen, Feng Lin, Caisheng Wang, Leyi Wang, Min Xu*,Active Diagnosability of Discrete Event Systems and its Application to Battery Fault Diagnosis. IEEE Transactions on Control Systems Technology,2017, 22 (5)
32. Xiang Liu, Li, Mian, Xu, Min*, Model-predictive-control-based novel anti-skid method for electric vehicles using the wheel acceleration and the motor torque. Proceedings of the Institution of Mechanical Engineers - Part D: Journal of Automobile Engineering, 2016, 230(13): 1780-1790.
33. Zhou, Jianhua, Xu, Min, Li, Mian*, Reliability-Based Design Optimization Concerning Objective Variation Under Mixed Probabilistic and Interval Uncertainties. Journal of Mechanical Design, 2016, 138(11): 114501.
34. Zhang, K, Xu, M, Wei, J, Cui, Y, Deng, K, Phenomenological two-phase multi-zone combustion model for direct-injection diesel engines. International Journal of Automotive Technology, 2016, 17(5): 895-907.
35. Cheng, Qiang, Xu, Min, Zhang, Zhendong, Xie, Nailiu, FEM simulation and performance analysis of a novel heated tip SIDI injector. International Journal of Heat and Fluid Flow, 2016, 59: 87-99.
36. Liu, Xiang, Li, Mian, Xu, Min *, Kriging assisted on-line torque calculation for brushless DC motors used in electric vehicles. International Journal of Automotive Technology, 2016, 17(1): 153-164,.
37. Zhou, Jianhua, Li, Mian*, Xu, Min, Multi-Disciplinary Tolerance Optimization for Internal Combustion Engines Using Gaussian Process and Sequential MDO Method. SAE International Journal of Materials and Manufacturing, 2016, 9(2): 410-418.
38. Zhou, Jianhua, Li, Mian*, Xu, Min, Multi-Disciplinary Tolerance Optimization for Internal Combustion Engines Using Gaussian Process and Sequential MDO Method. SAE International Journal of Materials and Manufacturing, 2016, 9(2): 410-418.
39. 秦文瑾, 许敏, 孔令逊, 直喷式汽油机缸内涡量场的本征正交分解. 内燃机学报, 2016, (03): 246-252.
40. 秦文瑾, 许敏, 孔令逊, 葛鹏辉, 动态模态分解方法在缸内湍流场研究中的应用.内燃机学报, 2016, (04)： 334-338.
41. 佟斯日古楞, 许敏, 吴胜奇, 喷嘴孔数及其布置对汽油直喷喷嘴闪沸喷雾-环境气体相互作用影响的研究.车用发动机, 2016 (03): 6-13.
42. 杨莉, 吴晓东, 许敏, 叶昌, 基于位置-力矩混合方法的线控转向系统双向控制. 汽车技术,2016, (02): pp 23-28.
43. Wenjin Qin, David Hung, Min Xu, Investigation of the temporal evolution and spatial variation of in-cylinder engine fuel spray characteristics. Energy conversion and management, 2015, 98
44. Yin Hua, Min Xu, Mian Li, Chengbin Ma, Chen Zhao, Estimation of State of Charge for Two Types of Lithium-Ion Batteries by Nonlinear Predictive Filter for Electric Vehicles. Energies, 2015, 8(5)
45. Yin Hua., Cordoba-Arenas, A., Warner, N., Rizzoni, G., A multi time-scale state-of-charge and state-of-health estimation framework using nonlinear predictive filter for lithium-ion battery pack with passive balance control. Journal of Power Sources, 2015, 28(0): 293-312.
46. Xiang Liu, Min Xu, Mian Li,New TA Index-Based Rollover Prevention System for Electric Vehicles. Energies,2015, 8 (3)
47. Wu, Xiaodong, Ma, Chengbin, Xu, Min, Zhao, Qunfei, Cai, Zhiyang, Single-parameter skidding detection and control specified for electric vehicles. Journal of the Franklin Institute, 2015, 352(2): 724-743
48. Otsuki Yoshinori, Nakamura Hiroshi, Arai Masataka, Xu, Min,The methodologies and instruments of vehicle particulate emission measurement for current and future legislative regulations. Measurement Science and Technology, 2015, 26 (9)
49. 李天云, 许敏,孔令逊,关于直喷喷雾液相温度分布的研究. 工程热物理学报,2015 (9)
50. 王斌,徐宏昌,许敏,潘浩星,增程式电动汽车的增程器系统控制优化与实验研究. 汽车工程,2015, 37 (4)
51. 王斌, 潘浩星, 许敏, 杨莉,纯电驱动车辆动力总成优化的研究. 汽车工程,2015, 37 (6)
52. 张铭, 许敏,直喷喷雾-环境气体两相流场的实验研究. 工程热物理学报,2015, 1
53. Jianye Su, Min Xu, Peng Yin, Yi Gao, David Hung ,Particle Number Emissions Reduction Using Multiple Injection Strategies in a Boosted Spark-Ignition Direct-Injection (SIDI) Gasoline Engine. SAE International Journal of Engines,2015, 8 (1)
54. 陈龙华,许敏,袁志远,王森. 二冲程发动机机械增压与曲轴箱增压进排气性能对比研究. 车用发动机,2014 (3)：33-38.
55. 苏建业,许敏,高弈,王家盛. 考虑外部冷却EGR的增压直喷汽油机爆震发生时刻预测模型研究. 内燃机学报, 2014.
56. Jiaqi Xi, Mian Li, Min Xu, Optimal energy management strategy for battery powered electric vehicles. Applied energy, 2014, 134
57. Hao Chen, Min Xu, David Hung, Hanyang Zhuang, Cycle-to-cycle variation analysis of early flame propagation in engine cylinder using proper orthogonal decomposition. Experimental Thermal and Fluid Science, 2014, 58
58. Bin Wang, Min Xu, Li Yang, Study on the economic and environmental benefits of different EV powertrain topologies. Energy Conversion and Management, 2014, 86
59. Jianye Su, Weiyang Lin, Jeff Sterniak, Min Xu, Stanislav V. Bohac. Particulate matter emission comparison of spark ignition direct injection (SIDI) and port fuel injection (PFI) operation of a boosted gasoline engine. Journal of Engineering for Gas Turbines and Power, 2014, 136(9)：091513 1-6
60. Jianye Su, Min Xu, Tie Li, Yi Gao, Jiasheng Wang. Combined effects of cooled EGR and a higher geometric compression ratio on thermal efficiency improvement of a downsized boosted spark-ignition direct-injection engine. Energy Conversion and Management, 2014, 78:65-73
61. 李天云,许敏,张高明. 乙醇与汽油的喷雾及蒸发特性研究. 工程热物理学报, 第35卷第7期, 2014.
62. Hao Chen, Min Xu, David L.S. Hung, Hanyang Zhuang, Cyclic variation analysis of early flame propagation in engine cylinder using proper orthogonal decomposition. Experimental Thermal and Fluid Science, 2014. 58(0): 48-55
63. Gaoming Zhang, David Hung, Min Xu, Experimental study of flash boiling spray vaporization through quantitative vapor concentration and liquid temperature measurements. Experiments in Fluids, 2014,55(8)
64. Hao Chen, David Hung, Min Xu, Jie Zhong, A dynamic thresholding technique for extracting the automotive spark-ignition direct-injection pulsing spray characteristics. Journal of Visualization, 2014,17 (3)
65. Ming Zhang, Min Xu, David Hung,Simultaneous two-phase flow measurement of spray mixing process by means of high-speed two-color PIV. Measurement Science and Technology, 2014, 25 (9)
66. Xiaodong Wu, Ma Chengbin Min Xu, Zhao Qunfei, Zhiyang Cai, Single-parameter skidding detection and control specified for electric vehicles. Journal of the Franklin Institute, 2014, 352
67. Hao Chen, David L.S. Hung, Min Xu, Hanyang Zhuang, Jie Yang, Proper orthogonal decomposition analysis of fuel spray structure variation in a spark-ignition direct-injection optical engine. Experiments in Fluids, 2014, 55(4) 1-12
68. 王家盛, 许敏, 苏建业, 高奕,进气门晚关策略对发动机经济性及炭烟排放的影响. 车用发动机,2014（3）
69. 赵金星,许敏,李冕,王斌,基于模型的Atkinson循环发动机燃油经济性遗传算法优化. 内燃机工程,2014, 35（5）
70. Jianye Su, Haoyue Zhu, Stanislav V. Bohac. Particulate matter emission comparison from conventional and premixed low temperature combustion with diesel, biodiesel and biodiesel–ethanol fuels. Fuel, 2013, 113:221-227.
71. Yuyin Zhang, Gaoming Zhang, Min Xu, Jianxin Wang, Droplet temperature measurement based on 2-color laser-induced exciplex fluorescence. Experiments in Fluids, (54):1583, 2013.
72. Hao Chen, David L.S. Hung, Min Xu, Jie Zhong, Analyzing the cycle-to-cycle variations of pulsing spray characteristics by means of the proper orthogonal decomposition. Atomization and Sprays, 2013, 23(7): p. 623-641
73. Ming Zhang, Min Xu, Yuyin Zhang, Gaoming Zhang, David J. Cleary, Flow-field Investigation of Multi-hole Superheated Sprays using High-Speed PIV. Part II: Axial Direction, (23):119-140, 2013.
74. Ming Zhang, Min Xu, Yuyin Zhang, Gaoming Zhang, David J. Cleary. Flow-field Investigation of Multi-hole Superheated Sprays using High-Speed PIV Part I. Cross-sectional Direction. Atomization and Sprays. 2012, 22(11)
75. Gaoming Zhang, Min Xu, Yuyin Zhang, Ming Zhang, David J. Cleary, Macroscopic Characteristics of Flash-Boiling Multi-Hole Sprays using Planar Laser Induced Exciplex Fuorescnce Technique, Part II: Cross-sectional Spray Structure. Atomization and Sprays, 2012, 22(10).
76. Gaoming Zhang, Min Xu, Yuyin Zhang, Ming Zhang, David J. Cleary. Macroscopic Characterization of Flash Boiling Multi-Hole Sprays using Planar Laser Induced Exciplex Fluorescence Technique Part I: On-axis Spray Structure. Atomization and Sprays. 2012, 22(10)
77. Jinxing Zhao, Min Xu, Fuel economy optimization of an Atkinson cycle engine using genetic algorithm. Applied Energy. 2012, 105: 335-348.
78. Huayang Zhu, Robert J. Kee, Longhua Chen, Jingjing Cao, Min Xu, Yuyin Zhang. Vaporization characteristics of methanol, ethanol, and heptane droplets in opposed stagnation flow at low temperature and pressure. Combustion Theory and Modeling. 2012, 16(4): 715-735.
79. Huayang Zhu, Yuyin Zhang, Min Xu, Robert J. Kee. Droplet vaporization characteristics of multicomponent mixtures of methanol and gasoline surrogate in opposed stagnation flows. Proceedings of the Combustion Institute, 2013, 34(1): 1545-1552
80. 邱宇,许敏,李冕. 基于多体动力学的发动机主轴承润滑特征Kriging建模研究.机械设计与研究, 2012, 28(3): 44-50.
81. Wei Zeng, Min Xu, Ming Zhang, Yuyin Zhang, David J. Cleary. Macroscopic characteristics for direct-injection multi-hole sprays using dimensionless analysis. Experimental Thermal and Fluid Science, 2012, 40(0): 81-92.
82. Wei Zeng, Min Xu, Yuyin Zhang, Zhenkan Wang. Laser sheet dropsizing of evaporating sprays using simultaneous LIEF/MIE techniques. Proceedings of the Combustion Institute, 2012, 1:1677-1685
83. Wei Zeng, Min Xu, Gaoming Zhang, Yuyin Zhang, David J. Cleary. Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuels. Fuel, 2012, 95(0): 287-297
84. 李明, 许敏, 赵金星, 徐宏昌, 李冕.基于GT-Power仿真的2.0L 汽油机动力性能分析与优化. 汽车技术, 2011, 2: 5 -11
85. 朱斌, 许敏, 张玉银, 张高明. 乙醇汽油喷雾特性研究及低压直喷喷嘴优化.车用发动机, 2011, 2: 79-84.
86. 鄂亚佳, 许敏, 曾纬, 张高明, 张玉银.基于平面激光 Mie 散射技术的乙醇喷雾特性研究. 内燃机工程, 2011, 2: 63 -67.

学术会议论文：
1. Di Xiao, Xuesong Li, David L.S. Hung, Min Xu. Characteristics of Impinging Spray and Corresponding Fuel Film under Different Injection and Ambient Pressure. WCX SAE World Congress, 2019
2. Shangze Yang, Xuesong Li, David L.S. Hung, Min Xu. Effect of Injection Pressure on Nozzle Internal Flow and Jet Breakup under Sub-Cooled and Flash Boiling Test Conditions. WCX SAE World Congress, 2019
3. Zhe Sun, Zhen Ma*, Xuesong Li, Min Xu. Study of Flash Boiling Spray Combustion in a Spark Ignition Direct Injection Optical Engine Using Digital Image Processing Diagnostics. WCX SAE World Congress, 2019
4. Tianyun Li, Min Xu, Shengqi Wu, Qinglin Xu, David Hung. Influence of the Injector Configuration on the Spray Evaporation Characteristics under Superheated Conditions. SAE, 2017
5. Jianhua Zhou, Mian Li, Min Xu. A New Sequential Multi-Disciplinary Optimization Method for Bi-Level Decomposed Systems. ASME,2015
6. Xiaodong Wu, Min Xu. Two-port network based bilateral control of a steer-by-wire system. IECON , 2015
7. Wenjie Qin, Min Xu, Peng Yin, David Hung. Analysis of the Cycle-to-Cycle Variations of In-Cylinder Vortex Structure and Vorticity using Phase-Invariant Proper Orthogonal Decomposition. SAE,2015
8. Tianyun Li, Min Xu, David Hung, Shengqi Wu, Siqi Cheng. Understanding the Effects of Fuel Type and Injection Conditions on Spray Evaporation Using Optical Diagnostics. SAE, 2015
9. Min Xu, Hao Chen, David Hung, Jie Yang, Hanyang Zhuang. Development of a POD-Based Analysis Approach for Quantitative Comparison of Spray Structure Variations in a Spark-Ignition Direct-Injection Engine. SAE, 2015
10. Tianyun Li, Min Xu, Shengqi Wu, Qinglin Xu, David L. S. Hung. Influence of the Injector Configuration on the Spray Evaporation Characteristics under Superheated Conditions. JSAE, 2015
11. Tianyun Li, Min Xu, David L.S. Hung, Shengqi Wu, Qinglin Xu and Huijia Lv. Study of Fuel Spray Characteristics under Various Ambient Temperatures Using Dimensionless Analysis. ICLASS, 2015
12. Siqi Cheng, Siriguleng Tong, Min Xu, David L.S. Hung. Study of Boiling Point Effect on Flash-Boiling Spray and Evaporation Characteristics by Blending Two-component Fuels. ICLASS, 2015
13. Shengqi Wu, Min Xu*, David L. S. Hung, Hujie Pan, Tianyun Li, Masataka. Arai. Correlation of Superheated Nozzle Internal Flow and Near-field Jet Breakup in a Two-Dimensional Transparent Nozzle. ICLASS, 2015
14. S.Tong, Siqi Cheng, Min Xu*, David L.S. Hung, Masataka. Arai. Investigation of Spray-Air Flow Interaction of Superheated Sprays using High-Speed Two-Color PIV Technique. ICLASS, 2015
15. Hao Chen, Min Xu, David L.S. Hung. Analyzing in-cylinder flow evolution and variations in a spark-ignition direct-injection engine using phase-invariant proper orthogonal decomposition technique. SAE Technical Paper 2014-01-1174, 2014
16. Shengqi Wu, Min Xu, David Hung, Hujie Pan, Siriguleng Tong. Characterization of Superheated Internal Flow in a Two-Dimensional Transparent Nozzle. ILASS Asia, 2014
17. Tianyun Li, Min Xu, David Hung, Qinglin Xu, Gaoming Zhang, Siqi Cheng. Study of Liquid Spray Temperature Distribution Based on Laser Induced Exciplex Fluorescence (LIEF) Technique. ILASS Asia, 2014
18. Hanyang Zhuang, David Hung, Min Xu, Jie Yang, Shaoxiong Tian, Wenjing Yang. Spray Structure Variation Analysis in an Optically Accessible Spark-Ignition Direct-Injection Engine. ILASS-Asia, 2014
19. David L.S. Hung, Hao Chen, Min Xu, Jie Yang, Hanyang Zhuang. Experimental investigation of the variations of early flame development in a spark-ignition direct-injection optical engine. ASME Conference Proceedings, Paper No. ICEF2013-19089, pp. V001T03A010, 2013. DOI: 10.1115/ICEF2013-19089
20. Hao Chen, Min Xu, David L.S. Hung, Jie Yang, Hanyang Zhuang. Development of a POD-based analysis approach for quantitative comparison of spray structure variations in a spark-ignition direct-injection engine. SAE Technical Paper 2013-01-2545 (SAE/KSAE 2013 Powertrains, Fuels & Lubricants Meeting), 2013. DOI: 10.4271/2013-01-2545
21. 庄瀚洋，孔令逊，许敏，陈豪，杨杰，门一凡. 光学诊断技术在可视化发动机内的应用. 中国工程热物理学会燃烧学分会, 134489, 2013
22. 陈豪，许敏，孔令逊，杨杰，庄瀚洋. 基于本征正交分解的缸内流场分析. 中国工程热物理学会燃烧学分会, 134452, 2013
23. Tianyun Li, Min Xu, Gaoming Zhang. Study of Spray Evaporation of Gasoline and Alcohol Fuel Using High Speed Schlieren and Mie Scattering Technique. Proceedings of 16th Annual Conference on Liquid Atomization and Spray Systems - Asia, Nagasaki, Japan, 2013
24. Hao Chen, Min Xu, David L.S. Hung, Jie Yang, Hanyang Zhuang. Fuel impingement analysis of flash-boiling spray in a spark-ignition direct-injection engine. Proceedings of 16th Annual Conference on Liquid Atomization and Spray Systems - Asia, Nagasaki, Japan, 2013: p. 136-142
25. Zhang, M., Xu, M. Simultaneous Velocity Field Measurements of Two-Phase Flows by means of High-Speed Two-Color PIV. Proceedings of 16th Annual Conference on Liquid Atomization and Spray Systems - Asia, Nagasaki, Japan, 2013
26. Hanyang Zhuang, David L.S. Hung, Min Xu, Hao Chen. Analysis of spray structure and penetration variations using proper orthogonal decomposition. Proceedings of 16th Annual Conference on Liquid Atomization and Spray Systems - Asia, Nagasaki, Japan, 2013
27. Hanyang Zhuang, David L.S. Hung, Min Xu, Hao Chen, Tie Li, Yuyin Zhang, Jie Yang, Yifan Men. Flame Area Correlations with Heat Release at Early Flame Development of Combustion Process in a Spark-Ignition Direct-Injection Engine Using Gasoline, Ethanol and Butanol. SAE Technical Paper 2013-01-2637, 2013
28. Wu S, Xu M, Zhang Y, Zhang G, Li L. Analysis of Flash-boiling Spray Mechanism using a Two-Dimensional Transparent Nozzle. 25th ILASS-Americas, May, 2013, Pittsburgh, PA, USA
29. Xiang Liu, Mian Li, Chengbin Ma, Min Xu. Kriging Assisted On-line Torque Calculation for Brushless DC Motors Used in Electric Vehicles. ISIE 2012, Hangzhou China
30. Zhenkan Wang, Min Xu, Wei Zeng, Yuyin Zhang, David L.S. Hung. Laser Sheet Dropsizing of DI Sprays under Various Conditions Calibrated Using PDI. 12th International Conference on Liquid Atomization and Spray Systems (ICLASS 2012), 2012, Heidelberg, Germany
31. Zhenkan Wang, Min Xu, David L. S. Hung, Yuyin Zhang, Wei Zeng, Ming Li. Development of Non-dimensional Drop Size Correlations of SIDI Multi-hole Sprays Using Phase Doppler Interferometry and High Speed Imaging. The 8th International Conference on Modeling and Diagnostics for Advanced Engine Systems (COMODIA 2012), 2012, Fukuoka, Japan
32. 高弈，许敏，李铁，张玉银，孔令逊，黄伟. LIVC与EIVC凸轮轴对增压小型化直喷汽油发动机性能影响的比较研究. 中国内燃机学会燃烧节能净化分会2012年学术年会, CSICE2012-032
33. 黄伟，张玉银，许敏，李铁，孔令逊，王家盛，高弈. 两次喷射策略在直喷汽油机中的应用研究. 中国内燃机学会燃烧节能净化分会2012年学术年会, CSICE2012-033
34. 吴达，许敏，张玉银. EGR对SI缸内直喷发动机性能的影响机理研究. 2012年IDAJ-China中国用户论文集，2012：1-6
35. 陈龙华，许敏，张玉银. 增压方式对两冲程发动机进排气行为特征影响机理分析. 2012年IDAJ-China中国用户论文集，2012：76-82
36. 周龙，陈龙华，徐宏昌，张玉银，许敏. 流固耦合方法对增压发动机缸盖热应力求解精度影响分析. 2012年IDAJ-China中国用户论文集，2012：439-446
37. Zhao Jinxing, Xu Min, Li Mian, Wang Bin and Liu Shuangzhai. Design and optimization of an Atkinson cycle engine with the Artificial Neural Network Method. App. Energy 2012;92:492–502
38. Ming Zhang, Min Xu, Yuyin Zhang, Wei Zeng. Effects of Superheat Degree on Flow Field of Multi-hole Fuel Sprays. 12th International Conference on Liquid Atomization and Spray Systems, 2012
39. Ming Zhang, Min Xu, Yuyin Zhang, Wei Zeng. Flow Field Characterization of Superheated Sprays from a Multi-hole Injector by Using High-speed PIV. SAE international congress 2012. SAE 2012-01-0457
40. 王家盛，许敏，李铁，孔令逊，张玉银，黄伟. LIVC凸轮轴结合EGR对高压缩比增压直喷发动机燃油经济性及碳烟排放的影响. 中国工程热物理学会燃烧学分会, 2012：124162
41. 张铭，许敏，张玉银. 适用于缸内直喷发动机的闪急沸腾喷雾特性的实验研究. 中国工程热物理学会燃烧学分会, 2012：124165
42. 张高明，许敏，张玉银. 基于双相激光诱导荧光定量测量直喷喷雾蒸汽浓度分布. 中国工程热物理学会燃烧学分会, 2012：124166
43. 陈豪，许敏，孔令逊，杨杰，张玉银，李铁. 基于本征正交分解的发动机缸内燃烧分析. 中国工程热物理学会燃烧学分会, 2012：124164
44. Bin Wang, Mian Li, Min Xu, Jianhua Zhou. Simulation-Based Energy Flow Study of Purely Electric-Drive Vehicles. Proceedings of the FISITA 2012 World Automotive Congress, 2012, 191(0): 615-630
45. Gaoming Zhang, Min Xu, Yuyin Zhang, David L.S. Hung. Characteristics of Flash Boiling Fuel Sprays from Three Types of Injector for Spark Ignition Direct Injection (SIDI) Engines. Proceedings of the FISITA 2012 World Automotive Congress, 2012, 189(0):443-454
46. Jianye Su, Min Xu, Yuyin Zhang, David L.S. Hung, Tie Li. Soot Emission Reduction Using Cooled EGR for a Boosted Spark-Ignition Direct-Injection (SIDI) Engine. The Eighth International Conference on Modeling and Diagnostics for Advanced Engine Systems, 2012, Japan
47. Xiang Liu, Chengbin Ma, Mian Li, Min Xu. A Kriging Assisted Direct Torque Control of Brushless DC Motor for Electric Vehicles. The 7th International Conference on Natural Computation, 2011
48. Zhenkan Wang, Min Xu, David L. S. Hung,Yuyin Zhang, Xiangchao Li. Investigating the Transient Drop Size Characteristics of Gasoline Direct Injection Pulsing Spray Using Phase Doppler Interferometry. ILASS –Asia 2011, 2011
49. Wei Zeng, Min Xu, Yuyin Zhang. Evaluation of Direct-injection Multi-hole Sprays using Dimensionless Analysis. ILASS –Asia 2011, 2011
50. Ming Zhang, Min Xu, Yuyin Zhang, Wei Zeng. Flow -field Evaluation of Superheated Fuel Sprays using High-speed PIV. 2011 Society of Automotive Engineers of Japan, 2011, JSAE 20119217, SAE 2011-01-1880
51. Gaoming Zhang, Min Xu, Yuyin Zhang, Wei Zeng. Quantitative Measurements of Liquid and Vapor Distributions in Flash Boiling Fuel Sprays using Planar Laser Induced Exciplex Technique. 2011 Society of Automotive Engineers of Japan, 2011, JSAE 20119216, SAE 2011-01-1879
52. Yuyin Zhang, Gaoming Zhang, Min Xu. Planar Laser Induced Exciplex Fluorescence Imaging for Fuel Liquid and Vapor Measurement in Flash-Boiling Sprays. The 11th Asia Symposium on Visualization, 2011
53. Wei Zeng, Cherian Idcherian, Todd Fansler, Michael Drake. Conditional Analysis of Enhanced Combustion Luminosity Imaging in a Spray-Guided Gasoline Engine with High Residual Fraction. SAE international Congress , 2011, SAE 2011-01-1281
54. Bin Zhu, Min Xu, Yuyin Zhang, Gaoming Zhang. Physical Properties of Gasoline–Alcohol Blends and Their Influences on Spray Characteristics from a Low Pressure DI Injector. Virtual Powertrain Conference, Beijing, China, October 27–28, 2010
55. Jinxing Zhao, Min Xu, Yuyin Zhang, Mian Li, Longhua Chen. Investigation and Development of an Atkinson Cycle Engine with the Aid of Artificial Neural Network, Virtual Powertrain Conference, Beijing, China, October 27–28, 2010
56. Wei Zeng, Min Xu, Ming Zhang, Y–Y. Zhang and David J Cleary. Characterization of Methanol and Ethanol Sprays from Different DI Injectors by Using Mie–scattering and Laser Induced Fluorescence at Potential Engine Cold–Start Conditions. SAE paper 2010–01–0602 (2010)
57. Hao Chen, Min Xu, Gaoming Zhang, Ming Zhang, Y–Y. Zhang. Investigation of Ethanol Spray from Different DI Injectors by Using Two–Dimensional Laser Induced Exciplex Fluorescence at Potential Cold-Start Condition. ASME 2010 Internal Combustion Engine Division Fall Technical Conference, ICEF2010–35090, Sept.12–15, San Antonio (2010)
58. Ming Zhang, Min Xu, Y–Y. Zhang, Gaoming Zhang, David J Cleary. High–Speed PIV Evaluation of Fuel Sprays under Superheated Conditions. The 14th Annual Conference on Liquid Atomization and Spray Systems – Asia, 105–111, Oct. 21 – 22, Jeju, Korea (2010)
59. Gaoming Zhang, Min Xu, Y–Y. Zhang, Ming Zhang, David J. Cleary. Macroscopic Characterization of Flash Boiling Sprays using Laser Induced Exciplex Fluorescence from a Multi–Hole DI Injector. The 14th Annual Conference on Liquid Atomization and Spray Systems – Asia , 112–118, Oct. 21 – 22, Jeju, Korea (2010)
60. Bin Zhu, Min Xu, Y–Y. Zhang, Gaoming Zhang. Physical Properties of Gasoline–Alcohol Blends and Their Influences on Spray Characteristics from a Low Pressure DI Injector. The 14th Annual Conference on Liquid Atomization and Spray Systems – Asia, 73–79, Oct. 21 – 22, Jeju, Korea (2010)
61. Gaoming Zhang, Min Xu, Y–Y. Zhang, Ming Zhang, David J. Cleary. Cross–Sectional Liquid and Vapor Distribution LIEF Imaging in Superheated Sprays. 21th Internal Combustion Engine Symposium, JSME & JSAE , 51–56, Nov. 10–12, Okayama, Japan (2010)
62. Jianye Su, David J Cleary, Min Xu, Y–Y. Zhang, Jie Yang, Yin Hua. Combining High Compression Ratio with Dual–Independent Cam Timing and Late Intake–Valve–Closing for a Downsized Boosted Direct–Injection Engine. 21th Internal Combustion Engine Symposium, JSME & JSAE, 115–121, Nov. 10–12, Okayama, Japan 2010
63. Yajia E, Min Xu, Wei Zeng and Yuyin Zhang. An Experimental and Numerical Investigation on Characteristics of Methanol and Ethanol Sprays from a Multi-hole DISI Injector. The 13th Annual Conference on Liquid Atomization and Spray Systems- Asia, 2009
64. Hao Chen, Min Xu, Wei Zeng, Ming Zhang, Gaoming Zhang and Yuyin Zhang. An Improved Monosize Droplet Generator for SMD Calibration. The 13th Annual Conference on Liquid Atomization and Spray Systems- Asia, 2009
65. Ming Zhang, Min Xu, Wei Zeng, Gaoming Zhang, Yuyin Zhang, David J Cleary. Characterization of Methanol and Ethanol Sprays Using Mie-scattering and Laser Induced Fluorescence under Engine Cold-start Conditions. The 13th Annual Conference on Liquid Atomization and Spray Systems- Asia, 2009
66. M. Xu, D. Porter, K. Moran, R. Palma, G. Panagos, and J. Winkelman. Development of Low Pressure Direct Injection System for Gasoline Spark Ignition Engines. 5th International Congress "Gasoline Direct Injection Engines", Haus der Technik, Essen, Germany, July 2003
67. M. Xu, D. Porter, Daniels, G. Panagos, J. Winkelman and K. Munir. Soft Spray Formation of a Low-Pressure High-Turbulence Fuel Injector for Direct Injection Gasoline Engines. SAE 2002-01-2746, presented at SAE Powertrain and Fluid Systems Conference, October 2002, received SAE Oral Presentation Award
68. M. Dong, G. Chen, M. Xu and Daniels. A Preliminary CFD Investigation of In-Cylinder Stratified EGR for Spark Ignition Engines. SAE 2002-01-1734, presented at SAE Spring Fuels and Lubricants Meeting, May, 2002
69. M. Xu. Opportunities of Better Fuel Injector Designs for Direct Injection Gasoline Engines. panelist presentation, ILass-Americas 2001
70. Daniels, M. Dong, M. Xu and G. Chen. Intake Manifold Tuning and Valve Control Strategies for an Unthrottled Engine. Global Powertrain Congress, June 2000
71. M. Xu, G. Chen, Daniels, and M. Dong. Numerical Study on Swirl-Type High-Dilution Stratified EGR Combustion System. SAE 2000-01-1949, Transaction of SAE 2000, presented at CEC/SAE Spring Fuels & Lubricants Meeting, Paris, France, June 2000
72. M. Xu and L. E. Markle. CFD-Aided Development of Spray for an Outwardly Opening Direct Injection Gasoline Injector. SAE Paper 980493, Transaction of SAE, 1998; Adapted in SAE Publications Entitled “Direct Injection SI Engine Technology” (1998) and “Actuators” (1999); Presented at SAE International Congress & Exposition, February, 1998
73. D. L. Varble, S. Mieney, and M. Xu. Design, Modeling and Development of a Unique Gasoline Direct Injection Fuel System. 31st ISATA, Paper 98VR028, Germany, June 1998
74. D. L. Varble, M. Xu, and P. VanBrocklin. Development of a Unique Outwardly-Opening Direct Injection Gasoline Injector for Stratified-Charge Combustion. 7.Aachener Kolloqium Fahrzeug- und Motorentechnik, October 1998
75. M. Xu and G. Chen. Recent Advances in Direct Injection Gasoline Injector Technology and Fuel Preparation Strategy. Invited Speaker, Proceedings of the Second International Workshop on Advanced Spray Combustion, Hiroshima, Japan, and November 1998
76. N. Chigier, M. Xu, D. Squarer and N. Rashidnia. Transport Phenomena in Stratified Multi-Fluid Flow in the Presence and Absence of Gravity. NASA’s Micro Gravity Fluid Physics Workshop, NASA-Lewis, 1995
77. M. Xu, D. Hasan, N. Chigier and P. Bennett. Assessment of an Imaging System for Spray and Particle Size Analysis. ASME Winter Annual Meeting, New Orleans, 1993
78. D. Hasan, U. Shavit, M. Xu, N. Chigier and P. Bennett. Digital Image Analysis of Liquid Breakup and Atomization. ILASS-Americas 93, Worcester, Massachusetts, 1993
79. N. Chigier, H. Eroglu, M. Xu, U. Shavit and A. Mansour. Images of Atomization. ILASS-Americas 92, San Ramon, California, 1992
80. H. Eroglu, N. Chigier, U. Shavit and M. Xu. Relation between Liquid Jet Atomization and Combustion Instability. ILASS-Americas 92, San Ramon, California, 1992
81. M. Xu and H. Hiroyasu. A Practical Calculation Method for Injection Pressure and Spray Penetration in Diesel Engines. SAE Paper, No.920624, Presented at 1992 SAE International Congress & Exposition, Detroit, Michigan, 1992
82. N. Chigier, H. Eroglu, U. Shavit and M. Xu. Physical Processes Involved in Injection and Atomization of Liquid Propellants. 28th JANNAF Combustion Meeting, San Antonio, Texas, 1991
83. U. Shavit, H. Eroglu, M. Xu and N. Chigier. The Effects of Turbulence on Atomization. Fifth Conference on Liquid Atomization and Spray Systems (ICLASS-91), Gaithersburg, Maryland, 1991
84. M. Xu and H. Hiroyasu. Optical Measurement of Tip Penetration of a Diesel Fuel Spray (2nd Report, Effects of Operating Conditions and Nozzle Geometry). JSME Transaction (B), Vol.57, No.535, 1991
85. M. Xu and H. Hiroyasu. Development of a New Optical Technique for Measuring Diesel Penetration. SAE Paper, No.902077, Presented at 1990 SAE International Fuels & Lubricants Meeting and Exposition, Tulsa, Oklahoma, 1990
86. M. Xu and H. Hiroyasu. Optical Measurement of Tip Penetration of a Diesel Fuel Spray (Development of Measuring Instrument). Bull. Of JSME, Vol.33, No.2, 1990
87. M. Xu and H. Hiroyasu. Optical Measurement of Tip Penetration of a Diesel Fuel spray (1st Report, Development of Measuring Apparatus). JSME Transaction (B), Vol.55, No.512, 1989
88. M. Xu, M. Arai and H. Hiroyasu. Optical Measurement of Tip Penetration of a Diesel Fuel sprays. JSME Chu-Si Koku Branch Annual Meeting, 1987
89. M. Xu, M. Arai and H. Hiroyasu. Flow Observation in a Diesel Injection Nozzle Using a Water Flow Model. JSME Transaction (B), Vol.53, No.491, 1987
90. M. Xu, M. Arai and H. Hiroyasu. Flow Observation in a Diesel Injection Nozzle Using a Water Flow Model. JSME Chu-Si Koku Branch Annual Meeting, 1986

课程名称：汽车动力系统先进技术
授课对象：硕士生/博士生
学时数：36
学分：2

课程名称：汽车节能环保与清洁能源
授课对象：本科生
学时数：32
学分：2

课程名称：现代汽车动力总成技术
授课对象：硕士生/博士生
学时数：48
学分：3

课程名称：新概念汽车设计和探讨
授课对象：本科生
学时数：16
学分：1

课程名称：工程学导论
授课对象：本科生
学时数：48
学分：3

1、专利名称：Stratified exhaust gas recirculation strategy for internal combustion engine
授权号：6,318,348 （美国）
2、专利名称：Fuel injector and method
授权号：6,065,684 （美国）
3、专利名称：Direct injection fuel injector spray nozzle and method
授权号：6,042,028 （美国）
4、专利名称：Fuel injector and method
授权号：6,036,120 （美国）
5、专利名称：Electronic flow control for a stratified EGR system
授权号：6,553,959 （美国）
6、专利名称：Pre-charging Strategy for Fuel Injector Fast Opening
授权号：6,766,788 （美国）
7、专利名称：Fuel Injector Nozzle Assembly
授权号：6,817,545 （美国）
8、专利名称：Fuel Injector Nozzle Assembly with Induced Turbulence
授权号：6,848,635 （美国）
9、专利名称：Low Pressure Direct Injection Gasoline Engine Systems
授权号：6,712,037 （美国）
10、专利名称：Fuel Injector Swirl Nozzle Assembly
授权号：6,783,085 （美国）
11、专利名称：Needle Alignment Fuel Injector
授权号：6,938,839 （美国）
12、专利名称：Fuel injector nozzle assembly
授权号：7,137,576 （美国）
13、专利名称：Fuel injector nozzle assembly
授权号：7,059,549 （美国）
14、专利名称：可变气门正时相位控制器
专利号：201010300386.x（中国）
15、专利名称：阿特金森循环发动机空燃比控制系统
专利号：201010300537.1（中国）
16、专利名称：阿特金森循环发动机控制系统及其控制方法
授权号：101787933B（中国）
17、专利名称：用于液体雾化与喷雾特性测试的液滴发生器
专利号：201010170297.8（中国）
18、专利名称：燃料直喷发动机的冷启动系统及其启动方法
授权号：102094734B（中国）
19、专利名称：两缸水平对置发动机组合框架式气缸盖
授权号：101718233B（中国）
20、专利名称：模块化电动汽车
专利号：201110003240.3（中国）
21、专利名称：发动机组合框架式气缸体及曲轴箱结构
专利号：201110110013（中国）
22、专利名称：用于直喷发动机的喷嘴
授权号：101737218B（中国）
23、专利名称：可切换式涡轮增压系统
公开号：CN102808688A
24、专利名称：带有双压气机的发动机系统
公开号：CN102808686A
25、专利名称: 涡轮有效流通面积可变的发动机系统
公开号：CN102817704A
26、专利名称：一种模块化车身与轮毂式电驱动的车辆
公开号：CN103465769A
27、专利名称：用于两相流动同场测试的光学诊断装置
公开号：CN103900788A
28、专利名称：一种包含外部废气再循环影响在内的汽油机爆震判定及发生时刻的预测方法
公开号：CN103758641A
29、专利名称：一种气缸停缸时停止活塞运动的机构
公开号：CN106286000B
30、专利名称：基于数字模拟技术的公差确定方法
公开号：CN105930552B
31、专利名称：理性公差设计驱动的智能制造方法
公开号：CN105912778B
32、专利名称：发动机废气再循环的测量方法
公开号：CN106351754B

“Progress in Energy and Combustion Science”期刊(影响因子26.467), 副主编
“Proceedings of the Combustion Institute”期刊(影响因子3.299), 编委
“Atomization and Spray”期刊（(影响因子1.262),编委
“International Journal of Powertrain Technology”期刊 编委
“汽车安全与节能学报” 期刊 编委
SAE fellow
Robert Bosch Chair Professor
国际液体雾化学会（ICLASS） 理事
国际燃烧学会工业关系委员会 委员
亚洲液体雾化学会（ILASS-Asia） 副会长
汽车电子控制技术国家工程实验室,常务副主任
上海市数字化汽车车身工程重点实验室,委员
上海市海外交流协会汽车专业委员会,副主任
国际汽车精英组织,常务理事
上海市电子学会常务理事,汽车电子专业委员会主任
“863” 节能与新能源汽车重大项目咨询专家组,专家
广西玉柴机器股份有限公司玉柴工程研究院专家委员会,委员
浙江汽车我学院,兼职教授
中国汽车工程学会常务理事
中国汽车人才研究会常务理事
中国汽车50人论坛成员
“中国心”年度十佳发动机评选专家评审委员会,主任
中国汽车“金方向盘奖”专家组 评委
中国汽车“轩辕奖”国际评审团 评委
中国电动车百人会 ,委员
上海市工业强基“新能源与智能网联汽车”专项 首席专家

1985―1991 日本文部省外国留学生奖学金
1998 Delphi Spontaneous Recognition Award
1998 Delphi Recognition Award
1998 Delphi Spontaneous Recognition
2002 SAE”杰出演讲”奖
2008 上海市浦江人才计划 A类（上海市人事局）
2009 通用汽车中国高校汽车领域创新人才奖一等奖 （教育部）
2009―2012 高校合作优秀奖（上汽通用五菱汽车股份有限公司）
2009 Gordon Research Conference授予“自然科学杂志社”奖
2010 2010年中国国际工业博览会中国高校展区优秀展品奖一等奖（教育部科技发展中心）
2010 优秀产品奖（第12届中国国际高新技术成果交易会组委会）
2018 改革开放40周年中国汽车产业杰出人物奖